LynxTwo仕様

Lynx Studio Technology, Inc.(U.S.A.)
輸入代理店:　㈱フックアップ　http://www.hookup.co.jp/

| LynxTwo | Lynx L22 (２ch仕様) | 見積請求 |

LynxTwo 24-bit/192kHz Analog I/O (PCI Bus)

Analog I/O

A Model	4 inputs / 4 outputs
B Model	2 inputs / 6 outputs
C Model	6 inputs / 2 outputs
Type	Electronically balanced or unbalanced, XLR connectors on L2Audio Cable
Level	'+4dBu norminal/+20dBu max., or -10dBV norminal/+6dBV max., software selectable in channel pairs
Input Impedance	Balanced mode: 24kΩ, Unbalanced mode: 12kΩ
Output Impedance	Balanced mode: 100Ω, Unbalanced mode: 50Ω
Output Drive Capability	600Ω impedance, 0.16μF capacitance
A/D and D/A Type	24-bit, multi-level, delta-sigma
Sample Rates	8kHz to 200kHz, including all standard rates with variable adjustment
Bit Depth	8, 16, 24, or 32 bit file types
On-board Buffer, Size	16 kbytes per input and output stream (mono or stereo)

Analog In Performance (measured in 24-bit mode with card installed in computer)

Frequency Response	20 - 20k(Hz), ±0.05dB at 44.1kHz sample rate
Dynamic Range	115dB, A-wtd.
Signal-to-Noise	114dB, A-wtd.
Channel Crosstalk	<-120dB, 1kHz signal @ -1dBFS
THD+N	-104dB(0.0006%), 1kHz signal @ -1dBFS, 22 -22k(Hz) BW

Analog Out Performance (measured in 24-bit mode with card installed in computer)

Frequency Response	20 - 20k(Hz), ±0.05dB at 44.1kHz sample rate
Dynamic Range	116dB, A-wtd.
Signal-to-Noise	116dB, A-wtd.
Channel Crosstalk	<-120dB, 1kHz signal @ -1dBFS
THD+N	-100dB(0.0010%), 1kHz signal @ -1dBFS, 22 -22k(Hz) BW

Digital I/O

Number / Type	1 input / 1 output AES/EBU or S/P DIF format, transformer coupled, XLR connectors on L2Sync Cable
Sample Rates	32/44.1/48/88.2/96(kHz)
Sample Rates Conversion	Supports conversion ratios up to 3:1 on digital input, 128dB dynamic range
Bit Depth	8, 16, 24, or 32 bit file types
Control / Status	Complete subcode and channel status support
On-board Buffer, Size	16 kbytes per input and output stream (mono or stereo)

LStream Expznsion Ports

Number	1 external / 1 internal
Compatibility	Supports Lynx ADAT, AES, TDIF, and other multichannel expansion modules
Type	High-speed serial, 8 channel input and output(each port), 24-bit data, 96kHz rate

SMPTE Time Code I/O

Type	LTC receiver(in) and generator(out), BNC connectors on L2Sync Cable
Frame Rates	24, 25, 29.97, 30(Hz) - drop and non-drop
Input Sync Rate	1/30 to 80 times norminal frame rate
Input Levels	200mV to 10V / 10kΩ
Output Level	1V / 75Ω

Clock I/O

Number	External: 1 input and output, BNC connectors on L2Sync Cable Internal: 1 input and output on board-mounted headers
Level / Impedance	TTL(clock signals) / 1Vpp(video)75Ω
Type	Input: word clock, 256X word clock, 13.5 and 27MHz video clocks, NTSC or PAL composite video Output: word clock

On-board Digital Mixer

Channel Capacity	32 input channels, 16 sub outputs
Resolution / Dither	32-bit / TPDF, Shaped, or RPDF
Morning Mixing	Any input to multiple outputs
Metering	Peak levels to -120dB on all inputs and outputs

Connections

Audio Port	Bracket-mounted 25-pin female D-sub connector for analog audio input and output
Sync Port	Bracket-mounted 15-pin high-density female D-sub connector for digital input and output,Sync in and out

Cables(Included)

L2Audio Cable	25-pin male D-sub to male and female XLR connectors on 6 foot shielded twisted pair cabling
L2Sync Cable	15-pin high-density male D-sub to (1)male and (1)femal XLR on 6 foot shielded twisted pair cabling and (4)female BNC connectors on 2 foot 75Ω coaxial cabling

Software

Windows Drivers	Windows 98/Me/NT/2000: MME, ASIO 2.0, and DirectSound
Macintosh Drivers	ASIO 2.0
LynxTwo mixer App	Provides complete control of digital mixer and all hardware settings.

General

PCI Bus	Version 2.2 compliant
Data Transfers	Up to 132 Mbytes/sec using custom 16-channel, zero-wait state, scatter-gather DMA engine; bus mastering
Size	5.0(H) x 7.4(W) x 0.75(D) (half-size PCI card)
Shipping Weight	3.25 lbs. With cables
Certifications	CE and FCC Class B

Top

Lynx L22 24-bit/192kHz Analog I/O (PCI Bus)